-40%

Smith & Wesson Presentation Case S&W French Fit Soft Contour Velour Interior

$ 42.23

Availability: 100 in stock
  • Brand: Pelson French Fitted Presentation Box
  • Condition: This 50 year old presentation case is in overall good condition with a few noted exceptions as follows. The outside surface has the normal wear and handling surface blemishes you would expect to see on a piece of this age. Refer to description photos for more details. The right side small brass hasp latch is missing and will need to be repaired and/or replaced. Refer to description photos for more details. The interior velour lining where the end of the handgun barrel sits in the fitted cut out has been torn away and will also need repair and/or replacement. The good news is the torn and missing piece of lining is less noticeable once the revolver is placed inside the fitted case because the barrel covers the noted issue. Refer to description photos for more details. This is a quality made true vintage (1970's to early 1980's) PELSON, Inc. S&W 4" revolver presentation case. This presentation case is worthy of your time and attention and can very easily be repaired with little effort.
  • For Gun Type: Smith & Wesson Revolver
  • MPN: Does Not Apply
  • Number of Guns: 1
  • Material: Wood with Simulated Leather Cover
  • Features: French Cut Fitted Interior
  • All returns accepted: ReturnsNotAccepted
  • Type: Presentation Box/Case

    Description

    For your consideration is this genuine vintage 1970's early 1980's
    PELSON
    Inc.
    made in Cerritos, California
    beautiful S&W large frame 4" barrel revolver presentation case.  The case is a classic French fit handgun presentation case
    designed with luxurious soft purple velour lining that includes a custom cutout for the placement of a box of ammunition
    .
    Please note, description photos # 9 and # 10 depict a 4" S&W .38 caliber M&P model revolver for illustration purposes only.
    The handgun pictured is NOT part of the listing and does NOT come with the presentation box
    .  Also note,
    the pictured S&W revolver is noticeably smaller than the S&W model revolver the case is actually fitted for
    .
    Although uncertain, I suspect this case may be designed to hold a larger frame S&W handgun like the Model 686 or the Model 28 (Highway Patrolman) model revolvers for example.  For your further consideration and reference, I did try placing both my 4" S&W Model 19 and a 4" Colt Python in the case and neither handgun fit.  Only the S&W M&P model pictured in the description photos aligns with the fitted configuration but is obviously much smaller than the revolver the case was designed to hold.  The aforementioned notwithstanding,
    PLEASE DO NOT BID ON THIS PRESENTATION CASE IF YOU ARE NOT CERTAIN IT WILL FIT YOUR REVOLVER
    .
    Please read; this presentation case is being offered in "as is" condition for "repair and/or restoration" as noted.  For the above reasons and because I do not know what specific S&W
    model
    revolver the case is fitted for and designed to accommodate there is a no return policy for this item.
    The case is constructed out of wood with
    a hinged flat mitered trimmed edge lid.  The inside of the case's lid is also padded and lined.  The outside of the box has a rich looking black pebbled leatherette covering.  The outside measurements of the presentation case are approximately 12-3/8" across, 8.0" wide and 2.50" tall.  The inside of the case measures approximately 11.25" across and 6-15/16" wide.
    This vintage 50 year old presentation case is in overall good condition with a few noted exceptions as follows.
    The outside surface has normal wear and handling surface blemishes as you would expect to see on a piece of this age.
    Refer to description photos for more details.
    The right side small brass hasp latch is missing and will need to be repaired and/or replaced.  Refer to description photos for more details.
    The interior velour lining where the end of the handgun barrel sits in the fitted cut out has been torn away and will also need repair and/or replacement.  The good news is the torn and missing piece of lining is less noticeable once the revolver is placed inside the fitted case because the barrel covers the noted issue.
    Refer to description photos for more details.
    Overall, this is a quality made true vintage (1970's to early 1980's) PELSON, Inc. S&W 4" revolver presentation case that is a collectible piece in its own right.  This presentation case is worthy of your time and attention and can very easily be repaired with little effort.  The needed small replacement brass latches are readily available for minimal expense as is the soft velour lining.  Don't pass this beauty by; if you recognize what S&W model revolver will properly fit inside this fitted case you have the advantage and the opportunity to acquire a beautiful piece to enhance both your handgun and your collection.
    Please look at the description photos closely as they confirm the condition of the vintage Pelson, Ltd. S&W revolver presentation case I describe and accurately depict the exact item you will receive if you purchase this piece.  If you have any questions or concerns regarding this case please email me and I will respond ASAP.
    The presentation case will ship from Texas zip code 77362 via USPS Priority Mail safely secured inside an 14.0" x 12.0" x 6.0" cardboard box weighing approximately 4.0 and 5.0 pounds after packaging.  Buyer pays true shipping cost, if you would like to estimate shipping to your home zip code you can enter the aforementioned shipping information into either the USPS or eBay postal calculator program.
    PLEASE LOOK AT THE OTHER ITEMS I CURRENTLY HAVE LISTED, AND CONTINUE TO LIST, ON EBAY.  THANKS!